Autobody, Automotive Tools and Supplies

Weight 16 oz, Handle, 12 inches, Head 3-1/2 inches, Face 1-3/16 inches

Weight 16 oz, Handle, 12 inches, Head 3-1/2 inches, Face 1-3/16 inches

Weighs 24 oz, Handle 14 inches, Head 14 inches, Face 2-1/8 inches

Weighs 24 oz, Handle 14 inches, Head 14 inches, Face 2-1/8 inches

of super-alloy, Cobalt and Includes one 3/8" cobalt series spot weld cutter that is a Patented self-centering tip design and the Tip prevents walking. The One piece construction increases over all...

of super-alloy, Cobalt and Includes one 3/8" cobalt series spot weld cutter that is a Patented self-centering tip design and the Tip prevents walking. The One piece construction increases over all strength and Up to 5 x faster than hold saw cutters.

This 3/8 inch Cutter is made of high speed steel (M2), used in either an pneumatic or electric drill. This bit capable of operating at speeds up to 2,000 RPM. It leaves a clean hole that requires...

This 3/8 inch Cutter is made of high speed steel (M2), used in either an pneumatic or electric drill. This bit capable of operating at speeds up to 2,000 RPM. It leaves a clean hole that requires very little grinding and has a self centering point that minimizes walking It will not require a punch and is a solid one piece construction and will not break or snap.

This Kit contain all 4 cutters (1/4, 5/16, 3/8 and 1/2 inch) these Cutters are made of high speed steel (M2), used in either an pneumatic or electric drill. This bit capable of operating at speeds...

This Kit contain all 4 cutters (1/4, 5/16, 3/8 and 1/2 inch) these Cutters are made of high speed steel (M2), used in either an pneumatic or electric drill. This bit capable of operating at speeds up to 2,000 RPM. It leaves a clean hole that requires very little grinding and has a self centering point that minimizes walking It will not require a punch and is a solid one piece construction and will not break or snap.

Exclusive foam design prevents flexing for use on flat or curved surfaces.

Exclusive foam design prevents flexing for use on flat or curved surfaces.

Rubber Flat Bottom, 2 3/4" x 5" uses standard 3" x 8" abrasive paper this block has molded nails which secure paper on each end

Rubber Flat Bottom, 2 3/4" x 5" uses standard 3" x 8" abrasive paper this block has molded nails which secure paper on each end

Exclusive foam design permits flexing and for use on flat or curved surfaces with vinyl facing for use with PSA paper.

Exclusive foam design permits flexing and for use on flat or curved surfaces with vinyl facing for use with PSA paper.

This 5/16 inch Cutter is made of high speed steel (M2), used in either an pneumatic or electric drill. This bit capable of operating at speeds up to 2,000 RPM. It leaves a clean hole that requires...

This 5/16 inch Cutter is made of high speed steel (M2), used in either an pneumatic or electric drill. This bit capable of operating at speeds up to 2,000 RPM. It leaves a clean hole that requires very little grinding and has a self centering point that minimizes walking It will not require a punch and is a solid one piece construction and will not break or snap.

Use on lead, solder and all types of body filler

Use on lead, solder and all types of body filler

Pull panel dents safely and easily without drilling holes, The Lipped edge provides strong hold yet allows easy release of vacuum. There are no trigger to gum up or break off, This provides an easy...

Pull panel dents safely and easily without drilling holes, The Lipped edge provides strong hold yet allows easy release of vacuum. There are no trigger to gum up or break off, This provides an easy clean job.