1/2" High Temp Green Poly Tape for Powder Coating Masking

High temp green poly tape is used to mask off areas of metal parts that should not receive powder coat, such as threaded holes, bearing bores, mating surfaces, and precision-fit areas. It withstands oven cure temperatures so it can remain in place through the entire coating and curing process.

The 1/2" high temp green poly tape is designed to withstand standard powder coat cure temperatures, typically up to 400°F (204°C) or higher depending on the product specification. This allows it to remain in place through the full cure cycle without adhesive failure or coating contamination.

Yes, Creative Coating Solutions also carries high temp green poly tape in 1-inch width for masking larger areas. Different width options allow powder coaters to select the right tape size for specific masking geometries and production requirements.

Green polyester (poly) tape is preferred for powder coating because the polyester backing resists high oven temperatures without melting, shrinking, or allowing adhesive to bleed onto the part surface. The green color provides clear visual contrast against metal, making it easy to verify full coverage of masked areas before coating.

High temp green poly tape can be applied to steel, aluminum, cast iron, and other metal substrates. For best results, the surface should be clean and free of oils, grease, and dust before tape application to ensure proper adhesion and a clean masking edge after curing.

Tape masking provides a flat, precise edge mask ideal for flat surfaces, slots, and edges, while liquid masking plugs and caps are better suited for round holes and threaded fasteners. Many powder coaters use both products together for comprehensive masking coverage on complex parts.

The 1/2" High Temp Green Poly Tape is available at creativecoatingsolutions.com. It is in stock and ships from the US. Creative Coating Solutions also carries 1" wide high temp tape for larger masking applications.