High Temp Phenolic Replacement Wheel For our Powder Coating Rack

High Temp Phenolic Replacement Wheel for Powder Coat Racks – Black Castor

Q: What is the High Temp Phenolic Replacement Wheel used for?

The High Temp Phenolic Replacement Wheel is a castor wheel replacement for Creative Coating Solutions powder coat racks. It is designed to withstand the high temperatures inside powder coating curing ovens, allowing racks to be loaded and rolled into the oven without switching out wheels.

Q: What temperature can the phenolic replacement wheel withstand?

High-temperature phenolic castor wheels are typically rated to withstand continuous temperatures of 250°F (121°C) or higher, making them suitable for powder coat curing ovens that operate in the 350–450°F range. Always verify the specific temperature rating for the wheel when used at your oven's curing temperature.

Q: Which powder coat racks is this replacement wheel compatible with?

The High Temp Phenolic Replacement Wheel (Black) is designed for Creative Coating Solutions powder coat racks. Verify the castor axle diameter and wheel bore size against your existing rack hardware before ordering to ensure a direct bolt-on fit.

Q: Why use a phenolic wheel instead of a standard rubber castor on powder coat racks?

Standard rubber castors melt, deform, and contaminate parts when exposed to oven temperatures above 200°F. High-temp phenolic wheels maintain shape and roll freely through the curing cycle, preventing rack immobility, rack damage, and powder coat contamination from off-gassing rubber.

Q: Can phenolic replacement wheels be used on racks in gas-fired ovens?

Yes, high-temp phenolic wheels are suitable for both electric and gas-fired powder coat ovens provided the operating temperature remains within the wheel's rated range. Gas ovens with radiant burners near floor level should be evaluated to ensure the wheel is not exposed to direct flame contact.

Q: How often should powder coat rack wheels be replaced?

Powder coat rack wheels should be inspected at each curing cycle and replaced when they show cracking, flat spots, reduced rotation, or contamination pickup. In high-volume operations processing multiple racks per day, a quarterly inspection and replacement schedule is a best practice.

Q: How do I order the High Temp Phenolic Replacement Wheel?

Order the High Temp Phenolic Replacement Wheel (Black) at creativecoatingsolutions.com/high-temp-phenolic-replacement-wheel. Creative Coating Solutions ships within the United States. Contact via the website for multi-piece pricing or to confirm compatibility with your rack model.

Item #: 5340-2N-PH

Price: $22.75

Estimate Shipping

Quantity:

About This Item

This Castor Has A 1-1/2 Wide Tread And Has Heat Range Of 475 Degrees Continuous And 550 Degrees Intermittent. This Castor Is A Perfect Castor For Painted Floors Or For An Area that Steel Castors will Be Too Aggressive.

Description

The High Temp Black Phenolic Replacement Castor Wheel is the correct heat-resistant castor for CCS powder coat racks that must roll in and out of powder coating ovens at elevated temperatures.

Key features:

Tread width: 1-1/2"
Heat rating: 475°F continuous / 550°F intermittent
Black phenolic material maintains structural integrity at oven temperatures
Will not soften, deform, or lose rolling function during cure cycles
Suitable for painted floors - less aggressive than steel castors
Sold individually - replace only the worn castor, not the entire rack

Inspect powder coat rack castors regularly. Worn or deformed castors make it difficult and unsafe to move loaded racks in and out of the oven. Replace before failure to avoid rack instability during production.

Reviews