3 Pack Of Nozzle Gaskets For Allsource pressure Pot Blasters 41001, 41002 and 41003

These nozzle gaskets are designed for Allsource pressure pot blasters 41001, 41002, and 41003. They are not compatible with ALC-brand blasters, which use different nozzle and housing dimensions. Verify your Allsource model number before ordering to confirm correct gasket fit.

The nozzle gasket seals the space between the nozzle and the pressure pot housing under the nozzle nut cap. Without a functional gasket, fine abrasive media escapes around the nozzle fitting during blasting, wasting media and reducing effective blast pressure at the nozzle exit.

Replace the nozzle gasket each time you remove the nozzle for replacement or cleaning. Gaskets compress and wear over multiple removal cycles. Reusing a compressed gasket risks media leakage even with the nut torqued down. The 3-pack means spares are ready for routine nozzle changes.

Media leakage around the nozzle fitting is caused by a worn, compressed, or missing nozzle gasket. The gasket provides the seal between the nozzle and the blaster housing. As the gasket wears, it cannot maintain a tight seal under blasting pressure, allowing media to escape around the fitting.

A 3-pack means you always have a spare on hand. Gaskets are consumed every time a nozzle is replaced. Running out of gaskets during a nozzle change delays the job. The 3-pack suits any shop that replaces nozzles regularly and avoids ordering a single gasket each time one is needed.