4'×4'×8' Powder Coat Spray Enclosure - Industrial Powder Booth

The 4x4x8 enclosure's 8-foot interior height accommodates parts hung from the full-height rack system. Parts up to approximately 7 feet tall can be coated while hanging, making this enclosure suitable for door frames, tall industrial brackets, and architectural components.

The 4x4x8 provides one additional foot of interior ceiling height compared to the 4x4x7 model. Both share the same 4x4 footprint and filtration system. Choose the 4x4x8 when your tallest parts require the extra vertical clearance that the 4x4x7 cannot accommodate.

The integrated filtration system is engineered for production-level powder coating, capturing overspray during repeated spray cycles throughout the workday. Filter media should be inspected regularly and replaced based on airflow performance to maintain optimal spray conditions.

The 4x4x8 enclosure occupies a 4-foot by 4-foot floor footprint, making it one of the most space-efficient options for shops with limited floor space. Despite the compact base, the 8-foot height provides generous vertical spray capacity for a wide range of industrial parts.

The enclosed design and filtration system of the 4x4x8 make color changes manageable. After clearing the current color from the spray gun and allowing the enclosure airflow to clear residual powder, the enclosure interior can be quickly wiped down before switching to a new powder color.

This enclosure is ideal for tall, narrow parts such as door frames, machine guards, tubes, posts, and other vertically oriented industrial components. It also works well for standard-height parts hung at eye level, where the extra ceiling height provides spray clearance above hanging racks.

The 4x4x8 spray enclosure requires a standard electrical connection for its filtration fan motor and any installed lighting. Contact Creative Coating Solutions for exact electrical requirements to ensure your facility's electrical service is adequate before installation.