5'×5'×7' Powder Coat Spray Enclosure - High-Clearance Industrial Booth

The 5x5x7 spray enclosure provides a 5-foot wide, 5-foot deep, and 7-foot tall interior, delivering 25 square feet of floor space with generous overhead clearance. This configuration is designed for wide, tall parts that exceed the capacity of both 4x4 and 5x5x6 enclosure models.

The 5x5x7 adds one foot of ceiling height over the 5x5x6, accommodating parts up to approximately 6.5 feet tall when hung. If you regularly coat motorcycle frames, bicycle frames, tall machine guards, or extended tube assemblies, the additional height of the 5x5x7 is worth considering.

Yes, the 5x5x7's combination of 5-foot width and 7-foot height makes it an excellent choice for motorcycle frames, full bicycle frames, and long tube assemblies. The wider footprint provides space to maneuver larger assemblies during spray application.

The 5x5x7 enclosure includes an integrated filtration system sized for the enclosure's volume, capturing overspray and maintaining shop air quality during production powder coating. Filter media and housing are designed for easy access and periodic replacement in production shop environments.

Yes, this enclosure is compatible with all standard powder coat application equipment including electrostatic spray guns and corona-charge systems. The enclosed spray zone effectively captures overspray from all application methods, keeping the shop clean regardless of gun type.

The 5x5x8 provides an additional foot of ceiling height for the most demanding tall-part applications. If your tallest parts are under 7 feet, the 5x5x7 is sufficient. For regularly coating parts requiring full 7+ feet of hanging space, the 5x5x8 is the better choice.

The 5x5x7 enclosure should be placed on a level concrete floor capable of supporting its weight and the weight of parts hung inside during coating. No special foundation preparation is typically required. Secure the enclosure to the floor if located in areas with forklift traffic.