9/64 Ceramic Pressure Nozzle Kit 3pk (Allsource)

The 9/64″ kit fits Allsource pressure pot blasters 41001, 41002, and 41003. This intermediate bore is specific to the Allsource blaster line and is not available in ALC nozzle ranges. Verify your model is in the 41001-41003 range before ordering to confirm compatibility.

The 9/64″ bore sits between 1/8″ and 5/32″ in the Allsource nozzle range. At 20 CFM and 80 PSI, it steps up coverage from the 1/8″ without reaching the air demand of 5/32″. Designed for Allsource blasters that specify this intermediate bore diameter.

Three nozzles cover two full replacement cycles before the next reorder. For shops running 9/64″ in production, the 3-pack reduces ordering frequency and keeps a replacement in stock. Replace the nozzle when bore shows visible widening or blast output drops without a pressure change.

No. The 9/64″ Allsource nozzle is sized for Allsource blasters 41001, 41002, and 41003. ALC blasters use different thread dimensions and housing geometry. Installing an Allsource nozzle in an ALC blaster will not seal correctly and risks abrasive leakage during blasting.

The 9/64″ nozzle draws 20 CFM at 80 PSI. A 7 to 10 HP two-stage compressor sustains this bore in production blasting. Compressors that cannot maintain 20 CFM at 80 PSI will pressure-drop during blasting, reducing media throughput and blast pattern consistency through the session.