High Temp Silicone Cap SC-0148X1000-N – 0.148" ID x 1.000" Length (100ct)

The SC-0148X1000-N has a 0.148-inch inside diameter and a 1.000-inch overall length, sized for threaded fasteners and precision holes in that diameter range.

These caps are rated to 500°F (260°C), making them compatible with standard powder coating cure cycles typically run between 350°F and 450°F.

Each package contains 100 pieces of the SC-0148X1000-N silicone masking cap.

Silicone masking caps slip over threaded bolts, studs, or open holes before the powder coat application stage. They prevent powder from settling on masked surfaces during the spray process and remain in place through the 500°F cure cycle, then are removed to reveal clean, uncoated threads or features.

These masking caps are molded from high-temperature silicone rubber, which provides excellent heat resistance, chemical resistance, and the elasticity needed for a secure but removable fit.

Yes. High-temp silicone caps can typically be reused across multiple powder coating runs. Replace caps that show tearing, permanent deformation, or reduced grip.

The SC-0148X1000-N caps are available in 100-count packs on the Creative Coating Solutions website. For volume pricing or custom quantities, contact customer service through the website contact page.