Enviro-Powder Strip - 30 Gallons (Non-Methylene Chloride Powder Stripper)

Enviro Powder Strip 30-Gallon | Non-Methylene Chloride Powder Coat Stripper

Q: What is Enviro Powder Strip and why is it methylene chloride-free?

Enviro Powder Strip is an advanced powder coat chemical stripper formulated without methylene chloride or NMP. These hazardous solvents face increasing regulatory restrictions. Enviro Powder Strip delivers comparable stripping performance while meeting EPA and OSHA workplace safety standards, protecting workers and the environment.

Q: How many parts can a 30-gallon drum of Enviro Powder Strip process?

Processing capacity depends on part size, powder coat thickness, and tank volume. A 30-gallon drum is typically used to charge a medium-size strip tank. Under normal production conditions, a properly maintained bath can strip dozens to hundreds of small-to-medium parts before replacement.

Q: What is the recommended operating temperature for Enviro Powder Strip?

Enviro Powder Strip performs best at elevated temperatures, typically between 120-160°F. Operating within the recommended temperature range accelerates stripping speed and maximizes bath life. A heated strip tank with temperature control is recommended for production use of this product.

Q: Is 30 gallons the right volume for my operation?

A 30-gallon size suits mid-size powder coat shops that strip parts regularly but do not need full 55-gallon drum quantities. It offers better economics than smaller containers and reduces reorder frequency compared to 5-gallon pails. Larger 50-gallon and drum sizes are also available.

Q: How does Enviro Powder Strip compare to Quick Cut 3 stripper?

Both are non-methylene chloride formulations, but they may differ in chemistry, aggressiveness, and optimal operating conditions. Enviro Powder Strip is often preferred for its gentler handling properties, while Quick Cut 3 may work faster on thick or stubborn coatings. Consult Creative Coating Solutions for application guidance.

Q: Can Enviro Powder Strip remove e-coat in addition to powder coat?

Yes, Enviro Powder Strip is effective at removing electrocoat (e-coat) as well as powder coat and conventional paint from properly prepared metal substrates. It is widely used in automotive and industrial rework shops where multiple coating systems need to be removed for reprocessing.

Q: How should unused Enviro Powder Strip be stored?

Store Enviro Powder Strip in its original closed container in a cool, dry location away from heat sources and open flame. Keep containers sealed when not in use to prevent evaporation of active components. Follow all storage guidelines on the Safety Data Sheet provided with shipment.

Price: $1,417.00

Estimate Shipping

Quantity:

About This Item

Enviro-Powder Strip is specifically designed to remove powder coating from ferrous and non-ferrous metals and silicone at room temperatures without the dangers of harmful acids. This product is readily biodegradable and is used on magnesium.

Specs:

State: Liquid
Appearance: Thin, clear liquid
Color: Straw
Flash Point: 109 deg. F
Boiling Point: 396 deg. F
pH: 13
label: Flammable

Product Usage:

Enviro-powder Strip is formulated for an immersion or dip application

Always use product at room temperature. Stripping times may vary from project to product depending on thickness of align with other environmental factors. While agitation is not required. It may accelerate stripping (air agitation recommended). After stripping the part should be rinsed with water to neutralize the stripper.

Product Disposal:

Municipal and state governments often regulate disposal, please dispose of all chemicals with guidelines set forth by SDS. Foe more information contact your local landfill or trash collector and reference the SDS (provided by request).

product Safety:

Always refer to tmy he MSU’s/SDS for comprehensive first aid and safety information before using this product.

Recommendations:

At times it is necessary to strain excess coating residue from the chemical. This improves the effectiveness and life of the stripper
Room temperature is. Defined as 50-85 degrees F however optimal usage is between 60-75 degrees F. Do not heat the stripper over 85, this will decrease performance and will increase the rate of performance.
While our Enviro-Strip can be used on all types of metal (and silicone), softer metals such as aluminum should not remain in stripper for excessive amounts of time as this may cause pitting and etching of the surface
Dispose of waste per local, state and federal regulations.

There has been a temporary slight increase in pricing due to the rising cost of the materials used to produce this product we are constantly working to reduce this cost.

Price Includes Shipping Although Additional Freight Does Apply To The Following States:
- New Your City

- Montana

- Idaho

- North Dakota

- South Dakota

(please contact us and we will send a payable invoice if from these locations)

View Our Sister Website For Drum Handling Equipment And Tools:

https://www.patriotsmaterialha...

Description

Enviro-Powder Strip 30-Gallon Drum is a production-volume non-methylene-chloride powder coat stripper for heated dip-tank chemical stripping operations.

Key features:

Non-methylene-chloride NMP-based formula meets EPA and OSHA workplace standards
Alkaline activator drives fast stripping of powder coat, e-coat, and paint
30-gallon drum charges a medium-size strip tank with fewer reorders
Operates best at 120–160°F in a heated immersion tank
Safe on steel and aluminum at recommended operating conditions

Ideal for mid-size powder coating shops and industrial rework operations running regular chemical stripping on production batches under OSHA-compliant workflows.

Reviews