Enviro-Powder Strip - 50 Gallons (Non-Methylene Chloride Powder Stripper)

Enviro Powder Strip 50-Gallon | High-Volume Non-MC Powder Coat Stripper

Q: Why choose the 50-gallon size of Enviro Powder Strip?

The 50-gallon size provides the best balance of volume and handling convenience for mid-to-large powder coat operations. It offers a lower per-gallon price than smaller containers, reduces reorder frequency, and is sized to fully charge most medium-to-large strip tanks used in production finishing shops.

Q: Is the 50-gallon Enviro Powder Strip the same formula as the 30-gallon?

Yes, the 50-gallon and 30-gallon sizes contain the same non-methylene chloride Enviro Powder Strip formula. The only difference is container volume. Both offer identical stripping performance, operating temperatures, and compatibility with steel and aluminum substrates.

Q: What size strip tank should I use with 50 gallons of Enviro Powder Strip?

A 50-gallon drum typically charges a strip tank in the 50-100 gallon range depending on desired bath concentration. Consult the product's technical data sheet for recommended dilution ratios and bath loading guidelines to optimize performance and bath longevity.

Q: Does Enviro Powder Strip require any special handling equipment for 50-gallon drums?

Standard drum handling equipment including drum dollies, drum pumps, and forklifts are appropriate for handling the 50-gallon drum. Use chemical-resistant drum pumps for transfer. Always wear appropriate PPE including gloves and eye protection when handling or transferring this product.

Q: How long does a 50-gallon bath of Enviro Powder Strip last in production?

Bath life depends on production volume, part load per cycle, and maintenance practices. Regularly monitoring bath concentration and removing stripped coating residue extends bath life significantly. Most production shops replenish or replace the bath based on measured stripping performance rather than a fixed schedule.

Q: Can I use Enviro Powder Strip in an immersion tank with a heating element?

Yes, Enviro Powder Strip is designed for use in heated immersion strip tanks. A properly sized tank heater maintains the recommended operating temperature to maximize stripping efficiency. Stainless steel or polypropylene tanks are recommended for chemical compatibility with this product.

Q: What are the shipping requirements for the 50-gallon size?

The 50-gallon drum ships via freight due to its size and weight. Creative Coating Solutions arranges LTL freight shipping for large chemical orders. Delivery times may vary by location. Contact us for freight quotes and lead times before placing your order.

Price: $2,137.00

Estimate Shipping

Quantity:

About This Item

Enviro-Powder Strip is specifically designed to remove powder coating from ferrous and non-ferrous metals and silicone at room temperatures without the dangers of harmful acids. This product is readily biodegradable and is used on magnesium.

Specs:

State: Liquid
Appearance: Thin, clear liquid
Color: Straw
Flash Point: 109 deg. F
Boiling Point: 396 deg. F
pH: 13
label: Flammable

Product Usage:

Enviro-powder Strip is formulated for an immersion or dip application

Always use product at room temperature. Stripping times may vary from project to product depending on thickness of align with other environmental factors. While agitation is not required. It may accelerate stripping (air agitation recommended). After stripping the part should be rinsed with water to neutralize the stripper.

Product Disposal:

Municipal and state governments often regulate disposal, please dispose of all chemicals with guidelines set forth by SDS. Foe more information contact your local landfill or trash collector and reference the SDS (provided by request).

product Safety:

Always refer to tmy he MSU’s/SDS for comprehensive first aid and safety information before using this product.

Recommendations:

At times it is necessary to strain excess coating residue from the chemical. This improves the effectiveness and life of the stripper
Room temperature is. Defined as 50-85 degrees F however optimal usage is between 60-75 degrees F. Do not heat the stripper over 85, this will decrease performance and will increase the rate of performance.
While our Enviro-Strip can be used on all types of metal (and silicone), softer metals such as aluminum should not remain in stripper for excessive amounts of time as this may cause pitting and etching of the surface
Dispose of waste per local, state and federal regulations.

There has been a temporary slight increase in pricing due to the rising cost of the materials used to produce this product we are constantly working to reduce this cost.

Price Includes Shipping Although Additional Freight Does Apply To The Following States:
- New Your City

- Montana

- Idaho

- North Dakota

- South Dakota

(please contact us and we will send a payable invoice if from these locations)

View Our Sister Website For Drum Handling Equipment And Tools:

https://www.patriotsmaterialha...

Description

Enviro-Powder Strip 55-Gallon Drum is a high-volume non-methylene-chloride powder coat stripper for industrial-scale heated dip-tank operations.

Key features:

Non-methylene-chloride NMP-based formula meets current EPA and OSHA standards
Alkaline activator quickly strips powder coat, e-coat, and paint from metal
55-gallon drum fully charges medium-to-large production strip tanks
Lowest per-gallon cost for high-volume shops
Compatible with stainless steel and polypropylene immersion tanks

Ideal for job coaters, high-volume powder coating shops, and industrial finishing operations running continuous production stripping under OSHA-compliant chemical safety programs.

Reviews