Quick Cut 3 -(30 Gallon) Non-Methylene Chloride Powder Coat Stripper

Quick Cut 3 Non-MC Powder Coat Stripper 30-Gallon | Production Volume Chemical Stripper

Q: Why upgrade from the 5-gallon to the 30-gallon size of Quick Cut 3?

The 30-gallon drum provides a lower per-gallon cost than the 5-gallon pail and is better suited for shops running strip tanks continuously. It reduces the frequency of reordering and handling individual pails, improving operational efficiency in mid-production powder coat rework operations.

Q: What strip tank size is recommended for 30 gallons of Quick Cut 3?

A 30-gallon drum of Quick Cut 3 typically fills or charges a 30-60 gallon strip tank depending on concentration requirements. Consult the product technical data sheet for dilution ratios and optimal bath loading guidelines to achieve maximum stripping performance and bath longevity.

Q: Does Quick Cut 3 in the 30-gallon size ship differently than smaller sizes?

The 30-gallon drum ships via LTL freight due to its size and weight. Creative Coating Solutions coordinates freight shipping for large chemical orders. Delivery timelines vary by destination. Contact us before ordering to confirm freight costs and estimated delivery to your facility.

Q: Can Quick Cut 3 remove both powder coat and e-coat from the same batch?

Yes, Quick Cut 3 effectively strips both powder coat and e-coat (electrocoat) from the same batch of parts in a strip tank. This versatility makes it valuable in automotive and industrial rework operations where parts carry multiple coating layers that all need removal.

Q: How often should I replace the Quick Cut 3 bath in production?

Bath replacement frequency depends on production volume and the amount of coating dissolved per cycle. Monitor bath performance and visually inspect for heavy contamination. Most operations replace or replenish the bath based on measured stripping efficiency rather than a fixed schedule to maximize chemical utilization.

Q: Is Quick Cut 3 safe to use around employees in an open shop?

Quick Cut 3 is formulated to reduce hazardous vapor exposure compared to methylene chloride products. However, adequate ventilation is always required, and workers must wear appropriate PPE as specified in the SDS. Consult the SDS for complete ventilation and exposure limit requirements.

Q: Can I heat Quick Cut 3 in a standard strip tank with a submersible heater?

Yes, Quick Cut 3 can be used with submersible or external tank heaters. Use chemical-resistant heaters compatible with the product. Operating at the manufacturer's recommended temperature is critical for optimal stripping speed and bath life. Stainless steel or polypropylene tanks are recommended.

Price: $1,251.00

Estimate Shipping

Quantity:

About This Item

Description:

Quick Cut 3 is our fastest non-methylene chloride Powdercoating stripper. This alcohol based immersion stripper uses an acid based activator to quickly remove powder coating. A strong substitute when methylene chloride strippers cannot be used or not desired. It is not to be used on magnesium.

State: Liquid
Appearance: Translucent
Color: Clear
Odor: Characteristic Penetrating Acid Cherry
Viscosity: Moderately Thin
Weight: 9.1 lb./gal
Boiling Point: 214 Degrees F
Solubility in water: 30%
Evaporation Rate: (ether=1)500 (Approx)
PH: ACIDIC

USAGE:

QUICK CUT 3 is formulated for an immersion or dip application.
Always use product at room temperature. Stripping time may vary from project-to-project depending on the type and thickness of the coating along with other environmental factors. While agitation os not required, it may accelerate stripping (air agitation is not recommended). /After stripping, Project should be rinsed with water to neutralize the chemical.
Dispose in accordance with all local, state and federal regulations.

Recommendations:

At times it is necessary to strain excess powder from the chemical. This improves the effectiveness of the chemical and lengthens its life expectancy.
Room temperature is defined as 50 degrees - 85 degrees F. Do not heat the stripper as it ones not improve performance and only increases the rate of evaporation.
While Quick Cut 3 can be used on all types metal (and silicone) softer metals such as aluminum should not remain in the stripper for excessive amounts of times as this may cause pitting and etching of this surface.

* This Item Is Currently In Stock*

View Our Sister Website For Drum Handling Equipment And Tools:

https://www.patriotsmaterialha...

Description

The Quick Cut 3 30-Gallon is a non-methylene-chloride, alcohol-based powder coat stripper for production-scale chemical stripping in powder coating shops.

Key features:

30-gallon drum sized for high-volume dip tank operations
Acid-activated immersion formula - fastest-acting non-MC stripper on the market
Removes cured powder coat and e-coat from steel and aluminum
OSHA-safe chemistry - methylene-chloride-free for worker and facility compliance

Ideal for job coaters and production shops needing faster throughput without the health restrictions of methylene chloride strippers. Ships nationwide from Creative Coating Solutions - veteran-owned.

Reviews