Quick Cut 3 -(5 Gallon) Non-Methylene Chloride Powder Coat Stripper

Quick Cut 3 Non-MC Powder Coat Stripper 5-Gallon | Fast-Acting Chemical Stripper

Q: What is Quick Cut 3 and how does it differ from methylene chloride strippers?

Quick Cut 3 is an industrial powder coat stripper formulated without methylene chloride or other highly hazardous solvents. It achieves fast stripping times through an advanced non-hazardous chemistry that removes powder coat, e-coat, and paint while meeting current EPA and OSHA safety standards.

Q: Is a 5-gallon pail the right size for my application?

A 5-gallon pail is ideal for small production shops, job shops doing occasional rework, or facilities testing Quick Cut 3 before committing to larger volumes. It can charge a small strip tank or be used for selective hand-stripping of individual parts in low-volume operations.

Q: How fast does Quick Cut 3 strip powder coat compared to other products?

Quick Cut 3's name reflects its fast-acting performance. At recommended operating temperatures, it typically removes powder coat significantly faster than many non-MC alternatives. Actual strip times depend on coating thickness, substrate, and bath temperature - contact us for specific performance data.

Q: Can Quick Cut 3 strip multiple layers of powder coat?

Yes, Quick Cut 3 is effective at removing multiple layers of powder coat, e-coat, and primer systems. Heavily coated parts may require longer soak times or multiple treatment cycles. Agitation and elevated temperatures significantly improve performance on thick or multi-layer coating systems.

Q: What safety equipment is required when using Quick Cut 3?

Always use chemical-resistant gloves, safety glasses or goggles, and a chemical-resistant apron when working with Quick Cut 3. Ensure adequate ventilation in the strip area. Refer to the Safety Data Sheet (SDS) provided with your order for complete PPE and handling requirements.

Q: Is Quick Cut 3 the same formula as the 30-gallon and 55-gallon versions?

Yes, all sizes of Quick Cut 3 contain the same non-methylene chloride formula. The 5-gallon, 30-gallon, and 55-gallon sizes differ only in container volume, allowing you to select the quantity that best matches your production volume and storage capacity.

Q: How should I dispose of spent Quick Cut 3 solution?

Spent Quick Cut 3 solution contains dissolved coating materials and must be disposed of per local hazardous waste regulations. Because it does not contain methylene chloride, disposal is generally simpler and less costly than traditional strippers. Consult your waste management provider for disposal guidance.

Price: $404.00

Estimate Shipping

Quantity:

About This Item

Description:

Quick Cut 3 is our fastest non-methylene chloride Powdercoating stripper. This alcohol based immersion stripper uses an acid based activator to quickly remove powder coating. A strong substitute when methylene chloride strippers cannot be used or not desired. It is not to be used on magnesium.

State: Liquid
Appearance: Translucent
Color: Clear
Odor: Characteristic Penetrating Acid Cherry
Viscosity: Moderately Thin
Weight: 9.1 lb./gal
Boiling Point: 214 Degrees F
Solubility in water: 30%
Evaporation Rate: (ether=1)500 (Approx)
PH: ACIDIC

USAGE:

QUICK CUT 3 is formulated for an immersion or dip application.
Always use product at room temperature. Stripping tiMessage may vary from project-to-project depending on the type and thickness of the coating along with other environmental factors. While agitation os not required, it may accelerate stripping (air agitation is not recommended). /After stripping, Project should be rinsed with water to neutralize the chemical.
Dispose in accordance with all local, state and federal regulations.

Recommendations:

At times it is necessary to strain excess powder from the chemical. This improves the effectiveness of the chemical and lengthens its life expectancy.
Room temperature is defined as 50 degrees - 85 degrees F. Do not heat the stripper as it ones not improve performance and only increases the rate of evaporation.
While quickCut 3 can be used on all types metal (and silicone) softer metals such as aluminum should not remain in the stripper for excessive amounts of times as this may cause pitting and etching of this surface.

* This Item Is Currently In Stock*

View Our Sister Website For Drum Handling Equipment And Tools:

https://www.patriotsmaterialha...

Description

Quick Cut 3 (5 Gallon) is a fast-acting non-methylene-chloride alcohol-based powder coat stripper for immersion removal of cured coatings.

Key features:

Fastest-acting non-methylene-chloride powder coat stripper on the market
Alcohol-based chemistry with acid activator drives rapid coating removal
Works at shop temperature or heated for faster cycle times
Removes powder coat, e-coat, and multi-layer paint systems
5-gallon pail suits small tanks and low-volume hand-strip operations

Ideal for small production shops, custom fabricators, and rework operations needing the fastest non-MC stripping performance available - without the regulatory and health burden of methylene-chloride strippers.

Reviews