What makes a powder coat stripper environmentally friendly?

Environmental powder coat strippers are formulated without methylene chloride, N-methylpyrrolidone (NMP), or other hazardous air pollutants listed under EPA regulations. They use biodegradable, alkaline-based chemistry that breaks down powder coatings through a safe immersion process. Products like the 1010P series meet stringent environmental standards while effectively removing epoxy, polyester, and hybrid coatings from metal substrates.

Can the 1010P stripper remove epoxy powder coating?

Yes, the 1010P Epoxy Powder Coat Stripper is specifically designed to remove epoxy and epoxy-polyester hybrid powder coatings. It works through immersion at room temperature or can be heated to accelerate the stripping process. Most coatings begin to lift within 2-8 hours depending on film thickness and temperature. The 1010P is available in 5, 30, and 55-gallon containers to fit any operation size.

Are environmental strippers safe for use on all metals?

The 1010P environmental stripper is safe for use on steel, aluminum, and most ferrous and non-ferrous metals. It will not etch, pit, or hydrogen embrittle metal substrates when used according to instructions. Always test on a small area first when working with specialty alloys or plated surfaces. The alkaline formula is gentler on metal than traditional acid-based or chlorinated solvent strippers.

How should I dispose of used environmental stripping chemicals?

Even though environmental strippers are less hazardous than traditional chemicals, used solution containing dissolved coating residues must be disposed of according to local and federal EPA regulations. Many environmental strippers can be treated and disposed of through standard industrial wastewater systems after neutralization. Contact your local environmental authority or Creative Coating Solutions at (618) 741-0740 for disposal guidance.

What equipment do I need to use environmental strippers?

At minimum, you need a chemical-resistant immersion tank (stainless steel recommended), PPE including chemical-resistant gloves, goggles, and an apron, and proper ventilation. A heated strip tank accelerates the stripping process. Creative Coating Solutions sells stainless steel table-top strip tanks and full-size heated tanks designed specifically for use with environmental strippers like the 1010P series.

Environmental Chemicals for Powder Coating

Products 1-3 of 3

Filter

Sort By

Eco-Strip heated powder coat stripper 30 gallon drum for immersion stripping

Show

Environmental Chemicals

Environmental Chemicals

Eco-Strip Heated Powder Coat Stripper - 30 Gallon

Eco-Strip Heated Powder Coat Stripper - 5 Gallon

Multi-Strip 100 Powder Coat Stripper - 5 Gallon